Is that water stain on your ceiling just an artistic touch or a hidden mold growth waiting to explode? Are you waiting on a thousand-dollar toxic mold remediation bill? Water damage doesn’t announce itself with flashing lights. By the time you spot peeling paint or a musty smell, your drywall may already be a crumbling, spore-filled liability. Before you grab a paintbrush and hope for the best, learn when a quick patch can save water damaged drywall repair costs or ignoring it could endanger your family’s health.
Why Does Wet Drywall Become a Health Hazard So Fast?
Drywall is made of a gypsum core and absorbs moisture within minutes. So, it is necessary to repair it as soon as possible, otherwise it will swell, soften, and lose its structure. Wet drywall can also lead to serious issues like mold and mildew growth, which is highly risky for occupants’ health.
When you prioritize your home maintenance, you have to address a lot of issues, from roofing concerns to interior repairs. Water damaged drywall repair should be one of the top concerns. This damage can be due to water leaks or floods, but it is important to know when to replace or repair it.
You can make your own inspection through different tools and methods, but it’s always better to call in the professionals for the assessment. Through infrared imaging and non-invasive methods, the water damage restoration companies in Seattle are able to find hidden moisture and suggest the right solution, whether that’s restoration or complete replacement of the drywall.
Also read: How to Dry the Drywall After a Leak?
How Long Does It Take for Drywall to Get Damaged by Water?
After water exposure, the drywall immediately starts to absorb it. Water enters the core through the paper layer, and the gypsum inside breaks down structurally within 24–72 hours. According to IICRC S500, if drywall is wet for more than 48 hours, it should be inspected for replacement.
Initially, the water damage may not be visible because of the unnoticeable slow leak. Most of the time, water enters the wall through cracks, behind baseboards, or above ceilings. In these cases, the drywall keeps getting weaker without showing any visible signs.
In Seattle’s humid environment, when moisture mixes with poor airflow, it increases the risk of fungal growth. Mold starts developing within 24-48 hours and makes the wet drywall a microbial risk. If you ignore it at the start, it increases health risks and restoration costs.
Can You Repair Water damaged drywall Without Replacing It?
At Green Planet Restoration Seattle, we can not only handle water damaged drywall repair without replacement but also conduct mold inspection and testing so your family is safe from hidden mold growth. We use the right moisture meters and advanced techniques to detect the severity. If the moisture meter shows a reading below 15%, your drywall can be repaired.
Here’s the process of repairing the drywall in such conditions:
- The damaged section is cut out and dried.
- The area is cleaned with an antimicrobial spray.
- Infrared cameras help locate hidden moisture.
- Drywall tape and patching compound seal the area.
- The surface is sanded and repainted.
This process works well for drywall repair after small leaks, such as under sinks or near washing machines. If the reading is higher, or if there’s visible damage or odor, it is always safer to go for drywall replacement.
What Does Moldy Drywall Look Like After a Leak?
When drywall gets wet, mold starts to appear within 48 hours. In the start, it will look like faint gray or green spots, but as time passes, it spreads and darkens. The most common signs of moldy drywall are given below.
- Black spots and lines
- Broken, soft drywall
- Changes in color around seams or edges
- Stale, musty smell close to the wall
If you see black mold, don’t try to fix it yourself. It could spread poisonous spores into the air. Call Green Planet Restoration Seattle immediately to handle it safely and professionally. We use sealed containment and air scrubbers to remove the mold.
Did sewage or floodwater soak into your drywall? Learn Why You Must Replace Sewage-Damaged Drywall And How to Do It
How Much Does Professional Water Damaged Drywall Repair Cost vs. Replacement?
The professional drywall repair vs. replacement cost depends on the wall’s condition and mold’s presence. Small repairs like fixing a small spot without mold removal can range from $150 to $400. These small fixes also include sanding, patching, and repainting the drywall.
If the drywall is fully wet and has hidden water damage, it must be replaced completely. It usually costs between $1.50 and $3.50 per square foot to replace an entire panel, excluding the labor cost. In Seattle, the professional labor rate is between $50 and $85 per hour, based on the complexity of the job. In many cases, homeowners’ insurance may cover the damage, especially if the water source was sudden or accidental.
Need Urgent Water Damaged Drywall Repair in Seattle?
Don’t let a small leak turn into a major disaster; act now before your water damaged drywall repair becomes a full-blown emergency! Every hour counts when dealing with moisture, mold, and structural damage. If you spot stains, swelling, or that distinctive musty smell, call Green Planet Restoration Seattle immediately for professional assessment and emergency water damage restoration services. Our expert technicians use advanced moisture detection and mold remediation techniques to protect your home and your family’s health. Schedule your inspection today or call us at (425) 903-3133 for 24/7 emergency response.
Remember: Waiting could cost you thousands in repairs… but acting now could save your drywall!
