Measurement tools
Moisture meters
You can't see how wet a wall is. A moisture meter can. We use them to find where the water went, decide what to dry or remove, and prove when the job is actually dry.
- Finds hidden
moisture - Readings logged
every day - Proves the
job is dry
- IICRCCertified firm
- CSLBLicensed contractor
- Bonded& insured
- InsuranceDirect billing
- 24/7/365Emergency dispatch
- TrustpilotRead our reviews
What moisture meters do on a job
Water travels. It wicks up drywall, spreads under flooring and runs along framing. Surfaces can feel dry while the material inside is still wet enough to grow mold. Moisture meters show what is really going on.
We take readings when we arrive, every day during drying and again at the end. That log is how we decide when to move equipment, and it is what your adjuster uses to confirm the work.
Types we use
| Tool | Best for | How it works | Typical use |
|---|---|---|---|
| Pinless (non-invasive) meter | Quick mapping | Reads moisture through the surface without making holes. Fast for finding how far water spread. | Walls, floors, cabinets |
| Pin meter | Exact readings | Two pins go into the material and measure moisture content directly. Used to confirm and track specific spots. | Drywall, wood, framing |
| Hammer probe and deep probes | Inside walls and subfloor | Longer pins reach deeper layers, like the bottom plate of a wall or under flooring. | Subfloors, baseboards |
| Thermo-hygrometer | The air | Measures temperature and humidity so we can calculate how much water is in the air. | Every room, every day |
How we use them on your job
Map on arrival
We check wet and dry areas and mark the edges of the water on the floor plan.
Set a dry standard
Readings from an unaffected area of the same material become the target.
Log every day
The same spots are measured daily and recorded with the equipment in use.
Adjust the setup
Equipment is moved or removed based on which areas are still wet.
Confirm and document
When readings meet the dry standard, the final log goes to you and your adjuster.
Common questions
What is a normal moisture reading?
It depends on the material and the meter. That is why we compare against an unaffected area of the same material in your home instead of a generic number.
Do pin meters damage my walls?
They leave two tiny holes, easily covered by paint. We use pinless meters wherever we can.
Will I get a copy of the readings?
Yes. The drying log is part of the documentation we give you and your insurance company.
Can a home inspector's meter give the same result?
A basic meter can find obvious moisture. Structural drying needs several meter types, daily readings and a written log.
The rest of the kit
