Containment & negative air
Plastic barriers with zipper doors and negative air machines keep air flowing into the work area, never out of it.

Mold on a wall, in a closet or in a closed-up cabin? Our San Bernardino crew finds the cause, contains it and handles the mold removal.
Mold remediation in San Bernardino, Redlands, Rialto, Lake Arrowhead and across San Bernardino County
Mold Remediation, San Bernardino
Mold in the Inland Empire nearly always has a water source behind it. In the valley it is often an AC condensate overflow, a swamp cooler line, a slow plumbing leak or a roof that let rain in during a storm. In the mountains it is cabins closed up for weeks, crawl spaces that stay damp and snowmelt that finds its way inside.
We find that moisture first with meters and thermal imaging, seal the work area under negative air, remove the moldy materials, HEPA clean and treat the framing and test again to confirm the result. Then the same team handles the repairs.
Scrubbing or spraying mold can send spores through the house. Book an inspection and we will plan the removal properly.
Rated 4.7 by San Bernardino
property owners.
Serving every community across San Bernardino.
Tell us what you're seeing. We'll set a time to come out.
Mold after a recent leak or flood? Call (760) 848-7118 so we can dry it out first.
Your information is secure and never shared.

Dispatched from our San Bernardino office.
San Bernardino mold
The source is different in a valley tract home and a mountain cabin. We look for both.
Evaporative coolers add moisture to the house, and AC condensate lines overflow in long summers. Both can feed mold in ceilings, closets and walls.
Cabins that sit shut for weeks trap moisture from leaks, snowmelt and cooking. Mold grows on wood paneling, closets and crawl space framing.
Rain getting in around old roofs and flashing soaks insulation and the bottom of walls, the way it did for one of our San Bernardino customers, whose lower walls grew mold after a roof leak.
Featured video
Featured video
Mold grows where moisture sits, and that is usually inside walls, ceilings and crawl spaces. This video shows how our crews find it and remove it safely.
Now showing: Mold Remediation
Mold remediation for homes, cabins, rentals and businesses from Fontana and Rialto to Redlands, Yucaipa and Big Bear.
Learn More about Mold Inspection and Moisture Mapping
Learn More about Containment and Negative Air
Learn More about Mold Removal and Cleaning
Learn More about Attic and Ceiling Mold
Learn More about Crawl Space Moisture and Mold
Learn More about Repairs After Mold Removal
Local. Fast. Trusted.
Killing the mold you can see doesn't stop the mold you can't. Here's how we take it out for good.
Moisture meters and thermal imaging show where the water is and how far the growth has spread.
We trace the leak or moisture feeding the mold and get it fixed or dried before removal starts.
The work area is sealed with plastic barriers and put under negative air so spores stay put.
Moldy materials come out and get bagged. Framing is HEPA vacuumed, cleaned and treated.
We test again to confirm spore levels are back to normal, then rebuild with the same team.

Our process & equipment
Containment is the part of mold work you never see in DIY videos. It is also the part that keeps the rest of the house clean while the moldy materials come out.
Plastic barriers with zipper doors and negative air machines keep air flowing into the work area, never out of it.
HEPA air scrubbers capture spores and dust during removal and run until the final cleaning is done.
Moisture meters and thermal cameras find the water feeding the growth and confirm the area is dry before rebuilding.
Local risks
These are the mold problems we see most across the area.

Mold along the bottom of walls after roof leaks, floods or plumbing leaks.

AC condensate and roof leaks that soak insulation and ceiling drywall.

Shower and toilet leaks that feed mold behind tile and inside walls.

Damp crawl spaces and basements in older and mountain homes.
Local reviews
What San Bernardino customers say about working with our team.
"Worked with Allan and his crew on a mold remediation and repair situation. They worked very well as a team. Great communication on a daily basis."
"After my roof was damaged and water leaked into my house, I had mold growing around the lower part of my walls. They completely removed all the mold and were very thorough… They took my insurance and most of the cost was covered."
"During one of our brutal summer heat waves, our AC's drain line clogged and backed up into the hallway closet… They pulled the wet carpet pad, dried the subfloor, and even walked me through a simple maintenance trick to keep it from happening again next season."
"After a pipe burst, our home in San Bernardino was a mess. Green Planet Restoration arrived fast and handled the water damage repair flawlessly. They kept us informed every step of the way."
Real reviews from customers of Green Planet Restoration of San Bernardino. Read more reviews
Mold remediation FAQs
Yes. We inspect with moisture meters and thermal imaging, take air and surface samples when the job calls for it, and test again after remediation to confirm spore levels are back to normal.
Yes. We inspect, find the moisture source, remove the mold under containment and dry the cabin. We can coordinate access with you or a property manager if you are not up the mountain.
It depends on the policy and the cause. Mold from a sudden covered leak is often part of that claim. We document the source and the damage so you and your adjuster can sort it out.
Removal means taking out the visible growth. Remediation means finding and fixing the moisture source, containing the area, removing the growth and drying everything so it does not come back. We do remediation.
Small surface spots on hard surfaces, maybe. Anything inside walls, ceilings or carpet, or larger than a few square feet, should be contained first. Scrubbing or sanding mold without containment spreads spores to other rooms.
It depends on the cause. Mold from a sudden covered leak is often included in that claim. Mold from long-term humidity or a slow leak usually is not. We document the source and the damage so you and your adjuster can sort it out.
Fast response. Local experts. 24/7 support.
Featured project
Moisture above this ceiling fed mold in the insulation and drywall. We contained the room, removed the materials and treated the framing.

Service areas
Mold remediation across the valley and the mountains, dispatched from our San Bernardino office.
Tell us what happened and a local project manager calls you back. No cost, no obligation.On site in under 45 minutes. We bill your insurance directly.
Takes about 20 seconds. We'll call you back shortly.